1. according to the requirements of the order agreement, responsible for completing the three-dimensional design, CAD drawings and BOM archiving, and the BOM output in the ERP system review;
2. Responsible for communicating with customers or relevant departments during the design process, and assisting in the completion of project plans and designs;
3. Responsible for following up the installation, commissioning and pre-acceptance of the designed equipment, recording and solving the problems;
4. responsible for the company's mechanical equipment, fixture, parts and other design work, according to the demand to complete the 3D and 2D design of parts, old equipment upgrade and transformation optimization;
5. responsible for communication with after-sales personnel, understand the problems of the customer site, and give solutions in time;
6. Completed the filing and updating of the design drawings in a timely manner, assisted in following up the procurement of the project standard parts;
1. Bachelor degree or above, male or female, 25-40 years old, mechanical and electronic engineering, mechatronics, mechanical design and automation and other similar majors.
2. Proficient in CAD, ProE, Creo product design software, Word, Excel office software, PS, CDR, AI graphic design software;
3. more than 2 years of power structure chassis development experience;
4. familiar with product appearance, structural design, familiar with sheet metal processing, materials, surface treatment, application of all kinds of standard parts and other related knowledge, understand plastic mold, stamping mold and its manufacturing, processing technology, familiar with shell protection standards and design application;
5. have independent design ability, have independent problem solving ability, have a strong sense of innovation;
Please send your resume to the email address below to contact us
Email 1: peng.mao@nbttech.com.cn
Email 2: fang.liu@nbttech.com.cn
Contact: Ms. Liu
1. responsible for the company's equipment high and low voltage wiring harness management;
2. prepare and manage equipment wiring diagram;
3. BOM table sorting, assist in the completion of file work;
4. participate in Denso prototype assembly;
5. Responsible for developing and improving the design standards and selection specifications of high-voltage wiring harnesses and accessories;
6. Responsible for the collaborative development of 2D/3D wiring scheme and direction of equipment high-voltage wiring harness; Design and verify the scheme of fixing mode and external protection mode of high voltage wire harness.
1. bachelor degree or above, electrical, mechanical and electrical related professional degree;
2. more than 2 years of relevant work experience; Outstanding fresh graduates can also be considered;
3. familiar with the wiring standards of electrical equipment;
4. proficient in AUTO CAD, ProE, eplan and other drawing software design;
5. familiar with the commonly used wire, processing technology, wire selection;
6. Love learning, integrity, dedication, strong sense of responsibility, good communication skills and teamwork.
Please send your resume to the email address below to contact us
Email 1: peng.mao@nbttech.com.cn
fang.liu@nbttech.com.cn
Contact: Ms. Liu
1. responsible for the preparation of technical solutions;
2. cooperate with the sales side to communicate with customers in technical links;
3. Responsible for following up the project progress;
4. Responsible for the preparation of overall project process documents;
5. Responsible for coordinating and docking with various departments;
1. Bachelor degree or above, major in electronic technology;
2. More than 5 years of experience in charge and discharge equipment industry;
3. understand the structure design, software related functions, equipment principles, etc.;
4. understand the working principle of the equipment, design architecture, etc.
5. skilled use of OFFICE, have a certain design ability;
6. have a strong understanding ability, can think independently and solve problems, diligent, studious and motivated, good at teamwork;
Please send your resume to the email address below to contact us
Email 1: peng.mao@nbttech.com.cn
Email 2: fang.liu@nbttech.com.cn
Contact: Ms. Liu
1. Schematic design of leading equipment circuit;
2. PCB Layout, electronic components selection;
3. work instruction preparation,
4. Assist in hardware design and development of new products of order equipment.
5. Responsible for the development of high-power power supply.
1. Bachelor degree or above, more than 3 years of hardware integrated system related work experience;
2. master the basic knowledge of digital circuit, analog circuit, understand high-power power topology.
3. familiar with schematic diagram and PCB design tools, such as Protel, Dxp; Ability to simulate circuits, such as matlab.
4. proficient in MCU system hardware circuit design, multi-layer circuit board design, high-power switching power supply design experience, independent project developers, experience in the same industry is preferred.
5. English language ability, able to read and understand English materials skillfully.
Please send your resume to the email address below to contact us
Email 1: peng.mao@nbttech.com.cn
Email 2: fang.liu@nbttech.com.cn
Contact: Ms. Liu
1. Responsible for the development of underlying drivers and application software based on 32-bit embedded chips and Linux platform.
2. responsible for module code writing, unit testing, test code writing and other work.
3. Participate in product related technical support work.
4. Write technical documents.
1. age 25-35 years old, bachelor degree or above, power electronics, electronics, automation and other related majors;
2. more than 2 years of embedded software development experience;
3. familiar with C, assembly and other software development languages; Familiar with the application of ST, Freescale and TI;
4. proficient in common embedded operating systems, such as FreeRTOS, UCOS, etc.
5.familiar with LINUX system, understand Linux common instructions;
6. familiar with CAN, RS485, RS232, SPI, TCPIP protocol and other buses and have experience in use;<
7. Familiar with the circuit principle and software control principle of DC/AC, DC/DC power supply topology.
Please send your resume to the email address below to contact us
Email 1: peng.mao@nbttech.com.cn
Email 2: fang.liu@nbttech.com.cn
Contact: Ms. Liu
1. Responsible for product functional testing and performance testing.
2. Responsible for designing test cases.
3. Responsible for setting up the test environment.
4. Responsible for testing problem feedback and regression, assisting software and hardware positioning analysis and verification.
5. responsible for writing test reports, user manuals, training materials and other documents.
1. bachelor degree or above, electronics, automation and other related majors preferred; At least 1-3 years relevant working experience.
2. master the commonly used testing technology, methods, tools, familiar with the software testing process, familiar with the basic principle of testing and process specifications.
3. Able to build and maintain test environment independently, design and execute test cases according to requirements, and submit test reports.
4. proficient in mode electricity and digital electricity.
5. skilled use of various test tools: multimeter, oscilloscope, CAN analyzer, logic analyzer, electric soldering iron, power quality analyzer, etc.
6. have the basic knowledge of the circuit, can understand the schematic diagram and parameter adjustment, with DSP power knowledge is preferred;
Please send your resume to the email address below to contact us
Email 1: peng.mao@nbttech.com.cn
fang.liu@nbttech.com.cn
Contact: Ms. Liu
1. use C# language, engaged in the development of the company's computer software;
2. Responsible for product demand analysis, software architecture design and related functional module development;
3. Responsible for writing relevant development documents, test plans, technical support documents, usage instructions, etc.;
4. responsible for the maintenance and upgrade of existing product software.
1. Bachelor degree or above, major in software engineering, electronic information engineering, etc.
2. proficient in C# or C++ (MFC) language, at least 2 years of.NET development experience;
3. Familiar with WINFORM and WPF to develop client programs; Familiar with.NET architecture and visualstudio development platform;
4. familiar with CAN, TCP/IP, RS485, SPI, MODBUS and other communication modes and protocols;
5. Familiar with WEBAPI call, creation and release;
6. master the database SQLSERVER or ORACLE, MYSQL, can skillfully use at least one ORM framework
7. Familiar with webservice and JSON
Please send your resume to the email address below to contact us
Email 1: peng.mao@nbttech.com.cn
Email 2: fang.liu@nbttech.com.cn
Contact: Ms. Liu
